SAP ABAP REGEX

Ejemplos REGEX

Ejemplo de Uso de regex en ABAP

DATA: lt_match_result TYPE match_result_tab.
data: l_regex type string,
      l_string type string.
data: l_matches TYPE i.

l_regex = '^[^<>()\[\]\\,;:\s@"`]+@([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}$'.
l_string = 'pablo.tapia@sapwiki.cl'.

FIND ALL OCCURRENCES OF REGEX l_regex IN l_string
          IN CHARACTER MODE RESPECTING CASE
          MATCH COUNT l_matches RESULTS lt_match_result.
if l_matches le 0.
  message i000(0k) with 'E-mail no valido' display like 'E'.
  return.
endif.

validar rut (muy simple)

FIND REGEX '[0-9]{1,8}-([0-9]|K)' IN l_strng.

valida e-mail

^[^<>()\[\]\\,;:\s@"`]+@([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}$

validar Números

validar número
1.1111 correcto
-1.1111 correcto
1.11111- correcto
1111 correcto

^[-?0-9]+([.])?([0-9]+)?-?$

números de 2 enteros y 7 decimales
1.1234567 correcto
11.1234560 correcto

^[0-9]{1,2}\.([0-9]{7})+$

con signo izquierda
-1.1234567 correcto
1.1234567 correcto

^-?[0-9]{1,2}\.([0-9]{7})+$

con signo derecha o izquierda
^-?[0-9]{1,2}\.([0-9]{7})+-?$

validar número entero
^[0-9]+$

numero NNN.NN
valido
111.1
11.11
1

^\d{1,3}(\.\d{1,2})?$

numero entero con máximo de 13 caracteres
valido
1234567890111
111
1

^\d{1,13}$

MODULE verificar_folio INPUT.
  DATA l_string TYPE string.
  DATA l_folio(7) TYPE n.

  IF zfi_datoscajas-folio IS NOT INITIAL.
    MOVE zfi_datoscajas-folio TO l_string.
    CONDENSE l_string.

    FIND REGEX '[^\d]' IN l_string IN CHARACTER MODE RESPECTING CASE.
    IF sy-subrc = 0.
      MESSAGE e000(0k) WITH 'Folio deber contener solo números'.
    ELSE.
      MOVE l_string TO l_folio.
      MOVE l_folio TO zfi_datoscajas-folio.
    ENDIF.
  ENDIF.
ENDMODULE.

Elimina prefijo

* NC00000009 -> 00000009
*saca prefijos de XBLNR
data l_xblnr type string.
 
l_xblnr = vbrk-xblnr.
 
REPLACE all OCCURRENCES OF REGEX '[[:alpha:]]' IN l_xblnr with ''.
if sy-subrc = 0.
....
endif.

ejemplo 2

REPLACE all OCCURRENCES OF REGEX '[^\d]' in l_xblnr WITH ''.

convertir fecha (yyyymmdd->dd/mm/yyyy)

data l_fecha(10).
l_fecha = sy-datum.
replace FIRST OCCURRENCE OF REGEX '(\d{4})(\d{2})(\d{2})'
                         in l_fecha WITH '$3/$2/$1'.
write:/ l_fecha.

convertir TIMESTAMP

DD.MM.YYYY HORA => YYYY-MM-DD HORA Ejemplo: 03.10.2025 14:55:44 => 2025-10-03 14:55:44

FORM get_timestamp CHANGING ev_timestamp TYPE string.
  DATA: lv_short_timestamp TYPE timestamp.
  DATA lv_timestamp(30).

  GET TIME STAMP FIELD lv_short_timestamp.

  WRITE lv_short_timestamp TO lv_timestamp TIME ZONE sy-zonlo.

  REPLACE FIRST OCCURRENCE OF REGEX '(\d{2})\.(\d{2})\.(\d{4})\s(.*)'
                           IN lv_timestamp WITH '$3-$2-$1 $4'.

  MOVE lv_timestamp TO ev_timestamp.

ENDFORM.

Convierte folio

* Folio1: PRmmaaRppnnnnnn
* Folio2: 0208020 + aa + mm + nnnnnn
* Ejemplo: PR0720R007188233 se convierte en 02080202007188233

*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM conv_folio USING p_xblnr TYPE bsis-xblnr
                 CHANGING p_folio TYPE ze_folio.

  DATA l_string TYPE string.

  CLEAR p_folio.

  l_string = p_xblnr.
  REPLACE FIRST OCCURRENCE OF REGEX '(.{2})(.{2})(.{2})(.{1})(.{1})(.{2})(.{6})'
                           IN l_string WITH '0208020$3$2$7'.
  IF sy-subrc = 0.
    p_folio = l_string.
  ENDIF.

ENDFORM.

usar REGEX como IF

ejemplo para verificar por clase de entrega

data l_lfart type string.
 
l_lfart = likp-lfart.
find REGEX 'Y101|Y100|Y102' in l_lfart.
if sy-subrc = 0.
  write:/ 'continue'.
else.
  write:/ 'Exit'.
endif.

obtener extensión de archivo

FORM get_extension USING iv_file TYPE string
                 CHANGING ev_ex TYPE string.

  DATA: lt_match_result TYPE match_result_tab.
  DATA: lv_regex  TYPE string,
        lv_string TYPE string.
  DATA: lv_matches TYPE i.
  DATA: lv_file(250).

  lv_regex = '\.([^.]+)$'.
  lv_string = iv_file.

  lv_file = iv_file.

  FIND ALL OCCURRENCES OF REGEX lv_regex IN lv_string
            IN CHARACTER MODE RESPECTING CASE
            MATCH COUNT lv_matches RESULTS lt_match_result.
  IF lv_matches > 0.

    DESCRIBE TABLE lt_match_result LINES DATA(lv_lines).
    READ TABLE lt_match_result INTO DATA(ls_result) INDEX lv_lines. "get the last occurrence

    ls_result-offset = ls_result-offset + 1.

    ev_ex = lv_file+ls_result-offset.
  ENDIF.

ENDFORM.

Validar Hora

Para validar una hora en formato HH:MM (24 horas) donde los ceros a la izquierda sean obligatorios (ej. 09:05), utiliza la siguiente expresión regular: [1]

^(0[0-9]|1[0-9]|2[0-3]):[0-5][0-9]$

Explicación del patrón:

• ^ e $: Indican el inicio y el final de la cadena, asegurando que no haya caracteres adicionales. [1, 2]
• (0[0-9]|1[0-9]|2[0-3]): Valida la sección de la hora.
  • 0[0-9]: Permite horas desde 00 hasta 09.
  • 1[0-9]: Permite horas desde 10 hasta 19.
  • 2[0-3]: Permite horas desde 20 hasta 23. [1, 2]
•  :: Separa las horas de los minutos.
• [0-5][0-9]: Valida los minutos del 00 al 59. [1]

opciones:

• Horas con cero inicial opcional (ej. 9:05):

^([0-1]?[0-9]|2[0-3]):[0-5][0-9]$

• Formato de 12 horas con AM/PM (ej. 09:05 PM):

^(0?[1-9]|1[0-2]):[0-5][0-9] ?[AaPp][Mm]$

• Máximo horas 99:59

^([0-9]{1,2}):([0-5][0-9])$

Ejemplos en EXITS

FUNCTION conversion_exit_zhora_input.
*"----------------------------------------------------------------------
*"*"Interfase local
*"  IMPORTING
*"     VALUE(INPUT)
*"  EXPORTING
*"     VALUE(OUTPUT)
*"----------------------------------------------------------------------
*01:30  => 1,5 hrs

  DATA: lt_match_result TYPE match_result_tab.
  DATA: lv_regex  TYPE string,
        lv_string TYPE string.
  DATA: lv_matches TYPE i.

  DATA: lv_hora_texto TYPE char5,
        lv_horas      TYPE i,
        lv_minutos    TYPE i,
        lv_decimal    TYPE p LENGTH 8 DECIMALS 2.

  lv_string = input.
  lv_regex = '^([0-1]?[0-9]|2[0-3]):[0-5][0-9]$'.

  FIND ALL OCCURRENCES OF REGEX lv_regex IN lv_string
            IN CHARACTER MODE RESPECTING CASE
            MATCH COUNT lv_matches RESULTS lt_match_result.
  IF lv_matches LE 0.
    MESSAGE e000(0k) WITH 'Formato horas inválido, debe ser en HH:MM'.
  ENDIF.

  lv_hora_texto = input.

* 1. Separamos las horas y los minutos
  SPLIT lv_hora_texto AT ':' INTO DATA(lv_hr_str) DATA(lv_min_str).
  lv_horas   = lv_hr_str.
  lv_minutos = lv_min_str.

* 2. Aplicamos la fórmula matemática
  lv_decimal = lv_horas + ( lv_minutos / 60 ).

  output = lv_decimal.

ENDFUNCTION.

FUNCTION CONVERSION_EXIT_ZHORA_OUTPUT.
*"----------------------------------------------------------------------
*"*"Interfase local
*"  IMPORTING
*"     VALUE(INPUT)
*"  EXPORTING
*"     VALUE(OUTPUT)
*"----------------------------------------------------------------------
*1,5 horas => 01:30

DATA: lv_decimal TYPE p DECIMALS 2 VALUE '8.75', " Ejemplo: 8.75 horas
      lv_minutos_totales TYPE i,
      lv_horas TYPE i,
      lv_minutos TYPE i,
      lv_resultado TYPE string.

lv_decimal = input.

" 1. Convertir horas decimales a minutos totales
lv_minutos_totales = lv_decimal * 60.

" 2. Calcular horas (división entera por 60)
lv_horas = lv_minutos_totales DIV 60.

" 3. Calcular minutos restantes
lv_minutos = lv_minutos_totales MOD 60.

" 4. Formatear el resultado a HH:MM con ceros a la izquierda
lv_resultado = |{ lv_horas WIDTH = 2 ALIGN = RIGHT PAD = '0' }:{ lv_minutos WIDTH = 2 ALIGN = RIGHT PAD = '0' }|.

CONDENSE lv_resultado.

output = lv_resultado. " Salida esperada: 08:45

ENDFUNCTION.

DEMOS

RS_SIC_REGEX_CHECK
DEMO_REGEX_TOY

Regular Expression Patterns

Escape character
Special character Meaning
\ Escape character for special characters
Special Characters for single character string
Special character Meaning
. Placeholder for any single character
\C Placeholder for any single character
\d Placeholder for any single digit
\D Placeholder for any character other than a digit
\l Placeholder for any lower-case letter
\L Placeholder for any character other than a lower-case letter
\s Placeholder for a blank character
\S Placeholder for any character other than a blank character
\u Placeholder for any upper-case letter
\U Placeholder for any character other than an upper-case letter
\w Placeholder for any alphanumeric character including _
\W Placeholder for any non-alphanumeric character except for _
[ ] Definition of a value set for single characters
[^ ] Negation of a value set for single characters
[ - ] Definition of a range in a value set for single characters
[ [:alnum:] ] Description of all alphanumeric characters in a value set
[ [:alpha:] ] Description of all letters in a value set
[ [:blank:] ] Description for blank characters and horizontal tabulators in a value set
[ [:cntrl:] ] Description of all control characters in a value set
[ [:digit:] ] Description of all digits in a value set
[ [:graph:] ] Description of all graphic special characters in a value set
[ [:lower:] ] Description of all lower-case letters in a value set
[ [:print:] ] Description of all displayable characters in a value set
[ [:punct:] ] Description of all punctuation characters in a value set
[ [:space:] ] Description of all blank characters, tabulators, and carriage feeds in a value set
[ [:unicode:] ] Description of all Unicode characters in a value set with a code larger than 255
[ [:upper:] ] Description of all upper-case letters in a value set
[ [:word:] ] Description of all alphanumeric characters in a value set, including _
[ [:xdigit:] ] Description of all hexadecimal digits in a value set
\a \f \n \r \t \v Diverse platform-specific control characters
[..] Reserved for later enhancements
[==] Reserved for later enhancements
Special Characters for character string patterns
Special character Meaning
{n} Concatenation of n single characters
{n,m} Concatenation of at least n and a maximum of m single characters
{n,m}? Reserved for later enhancements
? One or no single characters
* Concatenation of any number of single characters including 'no characters'
*? Reserved for later enhancements
+ Concatenation of any number of single characters excluding 'no characters'
+? Reserved for later enhancements
| Linking of two alternative expressions
( ) Definition of subgroups with registration
(?: ) Definition of subgroups without registration
\1, \2, \3 ... Placeholder for the register of subgroups
\Q ... \E Definition of a string of literal characters
(? ... ) Reserved for later enhancements
Special Characters for search string
Special character Meaning
^ Anchor character for the start of a line
\A Anchor character for the start of a character string
$ Anchor character for the end of a line
\Z Anchor character for the end of a character string
\< Start of a word
\> End of a word
\b Start or end of a word
\B Space between characters within a word
(?= ) Preview condition
(?! ) Negated preview condition
Special Characters for replacement texts
Special character Meaning
$0, $& Placeholder for the whole found location
$1, $2, $3... Placeholder for the register of subgroups
$` Placeholder for the text before the found location

Special character	Meaning
.	Placeholder for any single character
\C	Placeholder for any single character
\d	Placeholder for any single digit
\D	Placeholder for any character other than a digit
\l	Placeholder for any lower-case letter
\L	Placeholder for any character other than a lower-case letter
\s	Placeholder for a blank character
\S	Placeholder for any character other than a blank character
\u	Placeholder for any upper-case letter
\U	Placeholder for any character other than an upper-case letter
\w	Placeholder for any alphanumeric character including _
\W	Placeholder for any non-alphanumeric character except for _
[ ]	Definition of a value set for single characters
[^ ]	Negation of a value set for single characters
[ - ]	Definition of a range in a value set for single characters
[ [:alnum:] ]	Description of all alphanumeric characters in a value set
[ [:alpha:] ]	Description of all letters in a value set
[ [:blank:] ]	Description for blank characters and horizontal tabulators in a value set
[ [:cntrl:] ]	Description of all control characters in a value set
[ [:digit:] ]	Description of all digits in a value set
[ [:graph:] ]	Description of all graphic special characters in a value set
[ [:lower:] ]	Description of all lower-case letters in a value set
[ [:print:] ]	Description of all displayable characters in a value set
[ [:punct:] ]	Description of all punctuation characters in a value set
[ [:space:] ]	Description of all blank characters, tabulators, and carriage feeds in a value set
[ [:unicode:] ]	Description of all Unicode characters in a value set with a code larger than 255
[ [:upper:] ]	Description of all upper-case letters in a value set
[ [:word:] ]	Description of all alphanumeric characters in a value set, including _
[ [:xdigit:] ]	Description of all hexadecimal digits in a value set
\a \f \n \r \t \v	Diverse platform-specific control characters
[..]	Reserved for later enhancements
[==]	Reserved for later enhancements

ejemplos

^ start line
$ end line
^\w+$ matches one or more word characters (same as [a-zA-Z0-9_]+). Ex. TRUE: 33737733aaaaaa_aaaaaa FALSE: 33737733aaa+aaa_aaaaaa
^[0-9]+$ or ^\d+$ Full Numeric Strings 
\S+, one or more non-whitespaces